Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-2043003.png)
Installed location of spring washer on inner joint
Installed location of spring washer and thrust washer on outer joint
Pressing on inner constant velocity (CV) joint
-
Press on joint until stop.
-
Install lock ring.
-
Coat cover sealing surface with D 454 300 A2
-
Apply unbroken sealant bead with 2 to 3 mm diameter in area of inner holes - arrow - to clean cover surface.
