Eos (1F7) L4-2.0L Turbo (BPY) (2007)
‹› Bead diameter: width = 7 mm, height = 11 mm (including pre-coating, residual material on window glass and window flange)
‹› Minimum curing time, refer to => [ Minimum Curing Time ] See: Windows/Service and Repair/Procedures/Flush Bonded Window/Minimum
Curing Time
7
Height Dimension
‹› from window surface to upper edge of A-pillar
‹› Set a constant dimension of 8 mm using (3371)
8
Panel Gap Dimension
‹› from window edge to A-pillar
‹› Set a constant dimension of 2.5 mm using (3371)
9
A-pillar Body Flange
10
Adjustment Aid
‹› 443,845,631 A
‹› Only for installation, is removed after adhesive cures.
11
Windshield Frame Body Flange
12
Spacer
‹› Is part of windshield
13
Retainer
‹› Is a component of windshield
14
Plenum Chamber Cover
‹› Must only be pulled out of binding profile by hand.
Undamaged Window, Preparing For Glazing
Flush Bonded Window
Undamaged Window, Preparing for Glazing
‹› When re-using an undamaged window, cut back remaining adhesive sealant to 1 to 2 mm shortly before re-adhering, do not damage primer and
ceramic coating.