Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-4284008.png)
‹› The remaining material serves as a base for the new adhesive sealant being applied.
CAUTION!
Do not prime the adhesive surface or use a cleaning solution on it. Keep the adhesive surface free of dirt and grease.
Exception: If bonding is not performed immediately after cutting back, the remaining material must be activated using the activator D 181 801 A1.
New Window, Preparing For Glazing
Flush Bonded Window
New Window, Preparing for Glazing
Only the ceramic layer is applied to all new windows.
‹› The application area for adhesive bead 3 is not pre-coated and not primed.
-
Clean window circumference to width of 20 mm all around using cleaning solution D 009 401 04.
-
Then dry the edge of the window with a lint-free cloth.
CAUTION!
Ceramic application on window is not primer! It must be primed before the application of adhesive sealing material! Only use primer D
009 200 02!
-
Apply primer - 4 - evenly in one motion using applicator D 009 500 25 - 3 - to the previously cleaned area - 1 - of window.
