Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Coolant Line/Hose: Service and Repair
Small Coolant Pipe
Small Coolant Pipe
Special tools, testers and auxiliary items required
‹› Hose Clip Pliers (VAS 6362)
Removing
-
Drain the coolant. Refer to => [ Draining and Filling ] See: Service and Repair/Procedures.
-
Remove the air filter housing. Refer to => [ Air Filter Housing ] See: Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair/Air Filter Housing.
Vehicles with a Noise Generator:
-
Remove the charge air pipe from the noise generator. Refer to => [ Charge Air Pipe from Noise Generator ] See: Powertrain Management/Fuel
Delivery and Air Induction/Turbocharger/Service and Repair/Charge Air Pipe From Noise Generator.
Continuation for All:
-
Loosen the hose clamp - 2 -.
-
Remove the bolt - 4 -.
-
Disconnect electrical connector - arrow -.
-
Remove the bolt - 1 - and remove the charge air pipe downward.
-
Remove the bolts - arrows - and remove the electrical connectors - 1 through 3 - from the bracket.