Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Free up the wiring harness on the small coolant pipe - arrow -.
-
Remove the bolts - 2 and 3 -.
-
Disconnect the small coolant pipe from the coolant pump and from the coolant hoses - 1 and 4 -.
Installing
‹› Tightening specifications, refer to => [ Coolant Pipes Overview ] See: Coolant Pipes Overview.
Installation is performed in the reverse order of removal, noting the following:
‹› Secure all hose connections with hose clamps appropriate for the model.
-
Charge air pipe connecting, refer to => [ Hose Connections with Connector Couplings, Assembling ] See: Powertrain Management/Fuel Delivery
and Air Induction/Turbocharger/Service and Repair/Hose Connections With Connector Couplings, Assembling.