Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Loosen the bolt - 1 - for the coolant pump drive sprocket clockwise using (V.A.G 1331) and (T10360). Counter hold the top of the vibration
damper with a 24 mm socket when doing this.
-
Remove the bolt. Remove the drive sprocket - 1 - and toothed belt - 2 -.
Installing
Installation is performed in reverse order of removal, noting the following:
-
Replace the drive sprocket bolt.
-
Replace the seals and O-rings.
Drive sprocket installed position: the collar on the sprocket faces the transmission.
Tightening specifications, refer to => [ Coolant Pump and Thermostat Overview ] See: Cooling System/Thermostat/Service and Repair/Coolant Pump
and Thermostat Overview.