Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Water Pump: Service and Repair
Coolant Pump Driveshaft Seal
Coolant Pump Driveshaft Seal
Special tools, testers and auxiliary items required
‹› Thrust Piece (T10353)
Removing
-
Remove the coolant pump toothed belt. Refer to => [ Coolant Pump Toothed Belt ] See: Coolant Pump Toothed Belt.
-
Firmly press a screwdriver - 1 - into the surface of the seal - 2 -- arrow B -.
-
Pry out the seal - arrow A -.
Installing
-
Clean the running and sealing surface.
-
Lubricate the sealing surface of the balance shaft - 2 - with transmission oil.
-
Push the seal - 1 - onto the balance shaft.
‹› "Luftseite" or ("Outside") - arrow - must be readable from the outside.