Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Remove connector - 1 - in - direction of arrow - and remove Battery Interrupt Igniter - 2 - from vehicle.
Installing:
Install in reverse order of removal, noting the following:
‹› When installing connector on Battery Interrupt Igniter, ensure connector retainer engages audibly.
-
Tighten all threaded connections to specified torque shown in => [ Main Fuse Box Tightening Specifications ] See: Fuse
Block/Specifications/Main Fuse Box Tightening Specifications.
-
Reconnect battery, refer to => [ Disconnecting and Connecting Batteries In Luggage Compartment ] See: Starting and Charging/Battery/Service
and Repair/Removal and Replacement/Disconnecting and Connecting Batteries In Luggage Compartment.