Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Install the right plenum chamber cover.
-
Install the windshield wiper arms.
With Anti-Theft Immobilizer
Special tools, testers and auxiliary items required
‹› Locking Pliers
-
If the Engine Control Module (ECM) will be replaced, connect the vehicle diagnostic tester and perform the "Replacing Engine Control Module"
guided function.
Removing
-
Turn off the ignition.
-
Remove the windshield wiper arms.
-
Remove the plenum chamber cover.
-
Remove the bolts - 1 -.
-
Remove the ECM cover, if applicable.
-
Cover the plenum chamber with a clean cloth so that it does not get scratched.
-
Raise the ECM with the retaining mount slightly.
-
Release the ECM - arrows - and pull it out slightly.
-
Bend the raised ends - 1 - of the locking bracket outward.