Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Shifter M/T: Removal and Replacement
Shift Mechanism Overview
Shift Mechanism Overview
‹› Note the radio code on vehicles with a coded radio.
‹› When working on the shift mechanism in the engine compartment, disconnect the Ground (GND) cable from the battery.
‹› If the battery is to be reconnected, observe the work sequence after connecting the battery.
‹› When working on the shift mechanism in the engine compartment, remove the complete air filter housing, if it is located above the shift
mechanism.
‹› To replace the operating cables, remove the shift mechanism. Refer to => [ Shift Mechanism ] See: 02Q Transmission/Shift Mechanism.
‹› Do not bend the operating cables.
I - => [ Shift Knob and Cover ]
II - => [ Shift Lever and Housing, through 10.06 ]
II - => [ Shift Lever and Housing, from 11.06 ]
III - => [ Shift and Selector Cables ]
Shift mechanism, removing and installing. Refer to => [ Shift Mechanism ] See: 02Q Transmission/Shift Mechanism.