Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Headlamp Washer Spray Nozzle: Service and Repair
Spray Nozzle Holder
Spray Nozzle Holder
Removing:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Remove spray jet with cover cap - 1 - up to stop out of bumper cover.
-
Unclip cover cap - 1 - from bearings - arrows - on spray nozzle holder.
-
Lift lug - arrow - slightly and pull out spray nozzle holder.
Installing:
‹› Use the spray nozzle bracket to adjust how far the cap on the nozzle is pulled into the bumper cover. The cap will not close if the spray nozzle
bracket does not retract far enough. If the spray nozzle bracket moves with too much force, the cap and the bumper cover will get damaged.