Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Accessories and Optional Equipment > Antenna > Antenna Control Module > Component Information > Service and Repair > Antenna Module Carrier Plate

Page 1
background image

Antenna Control Module: Service and Repair
Antenna Module Carrier Plate

Antenna Module Carrier Plate

To remove the individual antenna modules, the antenna module carrier plate must be removed first.

Removing

Before starting repair work, perform the following:

-

Switch off ignition, switch off all electrical consumers and remove ignition key.

-

Remove the rear lid trim.

-

Remove bolts - arrows - and remove clips -  1 and 2 -.

-

Remove carrier plate.

-

Disconnect antenna harness connectors in wiring harness.

Installing

Installation is performed in the reverse order of removal.

Accessories and Optional Equipment > Antenna > Antenna Control Module > Component Information > Service and Repair > Antenna Module Carrier Plate

[PREV PAGE] [NEXT PAGE]