Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 3984

Page 8
background image

‹› Hex head bolt M6 x 10 changed from Torx bolt M6 x 12.

‹› Replace hex head bolt with a hex head bolt and a Torx bolt with Torx bolt.

18

Wheel bearing/hub unit

‹› The Anti-lock Brake System (ABS) sensor ring is installed in the wheel bearing.

FN3 Caliper, 16 Inch

1

Torx bolt, 12 Nm

2

Brake disc

‹› Internally vented, 312 mm diameter.

‹› Thickness: 25 mm.

‹› Wear limit: 22 mm.

‹› Must always be replaced together on both sides of axle.

‹› Remove the brake caliper and brake carrier before removing.

3

Torx bolt, 4 Nm

4

Brake pads

‹› Thickness: 14 mm without backing plate.

Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 3984

[PREV PAGE] [NEXT PAGE]