Eos (1F7) V6-3.2L (BUB) (2008)
Replace sanding disc prior to moving to next brake disc surface.
Clean all brake disc friction surfaces using soap and water solution.
Deglaze and Clean Brake Pads
Place 80-grit sand paper on flat hard surface.
Carefully sand brake pads until the surface glazing is removed.
Measure brake pad thickness using metric scale. If any brake pad is equal to or less than 50 percent of original thickness of new brake pads
(excluding backing plate):
Replace all 4 brake pads on axle you are servicing.
See appropriate Repair Manual in ElsaWeb for new brake pad thickness dimensions.
Install brake discs, brake pads, brake calipers and wheels. See appropriate Repair Manual in ElsaWeb for vehicle you are servicing.
Road test vehicle to confirm vibration concern is corrected.
No Special Parts required.