Eos (1F7) V6-3.2L (BUB) (2008)
‹› Hex head bolt M6 x 10 changed from Torx bolt M6 x 12.
‹› Replace hex head bolt with a hex head bolt and a Torx bolt with Torx bolt.
18
Wheel bearing/hub unit
‹› The Anti-lock Brake System (ABS) sensor ring is installed in the wheel bearing.
FN3 Caliper, 16 Inch
1
Torx bolt, 12 Nm
2
Brake disc
‹› Internally vented, 312 mm diameter.
‹› Thickness: 25 mm.
‹› Wear limit: 22 mm.
‹› Must always be replaced together on both sides of axle.
‹› Remove the brake caliper and brake carrier before removing.
3
Torx bolt, 4 Nm
4
Brake pads
‹› Thickness: 14 mm without backing plate.