Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1186005.png)
When removing, make sure that surface of cylinder is not damaged.
Installing
-
The surface of the piston and seal must only be cleaned with mineral spirits and then dried.
-
Thinly coat piston and seal with assembly paste ( G 052 150 A2) before installing.
-
Install the seal into the brake caliper.
-
Insert the protective cap - A - into the disk (T 10146/6) - 1 -.
