Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-707002.png)
-
Remove the bolts - 1 and 2 - and remove the vacuum actuator from the intake manifold.
-
Disconnect the electrical connector - arrow - from the Engine Coolant Temperature (ECT) sensor (G62).
-
Disconnect the secondary air hose at the position indicated by the - arrow -.
-
Free up air hose at the bracket.
-
Disconnect the coolant hoses at the positions indicated by the - arrows -.
