Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster Valves > Page 1800

Page 5
background image

-

Remove the (T10068 A).

‹› When rotating the crankshaft, the tensioning rail must be pressed by hand against the camshaft timing chain at the chain tensioner, so that the

camshaft timing chain does not jump over!

-

Rotate the crankshaft twice in engine rotation direction and check the valve timing. Refer to => [ Vehicles through 11.08 ] See: Cylinder Head
Assembly/Testing and Inspection.

If the marks match:

-

Secure the respective camshaft to be tightened using a 32 mm open end wrench on the recess - arrow -.

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster Valves > Page 1800

[PREV PAGE] [NEXT PAGE]