Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Crankshaft Main Bearing Seal > Component Information > Service and Repair > Crankshaft Seal, Transmission Side > Page 2102

Page 1
background image

Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Sealing Flange, Vibration Damper Side

Crankshaft Sealing Flange, Vibration Damper Side

Special tools, testers and auxiliary items required

‹› Counter-Holder Tool (T10069)

‹› Assembly Tool (T10215)

‹› Torque Wrench (V.A.G 1601)

‹› Torque Wrench (40-200 Nm) (V.A.G 1332)

‹› Sealant (D 176 501 A1)

Removing

-

Remove the ribbed belt. Refer to => [ Ribbed Belt ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed
Belt.

-

Remove the vibration damper. To do so, lock the vibration damper using (T10069).

-

Remove the oil pan. Refer to => [ Oil Pan ] See: Engine Lubrication/Oil Pan/Service and Repair/Oil Pan.

-

Remove the sealing flange bolts and flange.

-

Remove the sealant residue from the sealing surfaces.

Installing

-

Before installing, remove any remaining oil from the end of the crankshaft with a clean cloth.

-

Cut the tube nozzle at the front mark (nozzle diameter approximately 3 mm).

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Crankshaft Main Bearing Seal > Component Information > Service and Repair > Crankshaft Seal, Transmission Side > Page 2102

[PREV PAGE] [NEXT PAGE]