Jump Starting: Specifications (page 2 of 3)

Jump Starting: Service and Repair

Jump Start Point with Suppressor

Special tools, testers and auxiliary items required

‹› Torque Wrench (V.A.G 1331)

Removing:

-

Turn off the ignition and all electrical consumers.

-

Disconnect battery, refer to => [ Disconnecting and Connecting Battery In Engine Compartment ] See: Starting and Charging/Battery/Service and
Repair/Removal and Replacement/Disconnecting and Connecting Battery In Engine Compartment or => [ Disconnecting and Connecting Batteries
In Luggage Compartment ] See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Disconnecting and Connecting
Batteries In Luggage Compartment.

‹› Air filter housing is removed for reasons of clarity. It is not required when doing repairs.

-

Disengage retaining clip - arrow A - and open cover -  1 - over positive pole pick-up.

-

Disengage cover - 2 - over electrical wires in -  direction of arrow B -.

-

Remove the nuts - 5 - and - 6 - on positive wires.