Eos (1F7) V6-3.2L (BUB) (2008)
Connect a Hand held remote control (jumper) to terminal - 1 - of the fuel delivery unit and to vehicle battery (+).
Connect a jumper cable from an Electrical connector test lead set to terminal - 5 - of the fuel delivery unit and to vehicle Ground (GND).
Fuel system is under pressure! Before opening the system, place rags around the connection area. Then release the pressure by carefully
loosening the connection.
Disconnect fuel line - arrow - by pulling release button.
Connect the Fuel pressure test set (high pressure) onto the disconnected fuel supply line.