Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Maintenance > Wheels and Tires > Wheels > Component Information > Service and Repair > Wheel Mounting, Protecting against Corrosion > Page 1741
Wheels: Service and Repair
Wheel Centering Seat, Protecting against Corrosion
Applies to Light-Alloy and Steel Wheels
‹› When a wheel is changed, the centering seat should be sprayed with wax spray (D 322 000 A2) in order to prevent corrosion between wheel
centering seat and rim.
Thoroughly clean the centering seat on the wheel hub and the centering surface on the rim.
Apply wax in area of centering - arrow - using a brush.
‹› Always make sure that only centering - arrow - is waxed and not rim contact surfaces. As a consequence, the brakes would become contaminated
while driving and thereby result in poor braking.
Install wheel and tighten. Refer to => [ Wheel Bolt Tightening Specification ] See: Wheel Fastener/Specifications.
|[PREV PAGE] [NEXT PAGE]|