Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Maintenance > Wheels and Tires > Wheels > Component Information > Service and Repair > Wheel Mounting, Protecting against Corrosion > Page 1742

Page 1
background image

Wheels: Service and Repair
Wheel Mounting

Wheel Mounting

-

Coat the wheel centering seat with corrosion protection. Refer to => [ Wheel Centering Seat, Protecting against Corrosion ] See: Wheel Centering
Seat, Protecting against Corrosion.

1. When mounting a wheel, tighten all wheel bolts uniformly by hand. 

2. Tighten the wheel bolts diagonally to 30 Nm.

3. Lower the vehicle to the floor and tighten diagonally all the wheel bolts with the wrench to the specified wheel bolt tightening specification. Refer

to => [ Wheel Bolt Tightening Specification ] See: Wheel Fastener/Specifications.

CAUTION!
Never use an impact wrench to install the wheel bolts! 

Maintenance > Wheels and Tires > Wheels > Component Information > Service and Repair > Wheel Mounting, Protecting against Corrosion > Page 1742

[PREV PAGE] [NEXT PAGE]