Eos (1F7) V6-3.2L (BUB) (2008)
Electronic Throttle Actuator: Service and Repair
Accelerator Pedal Module
Accelerator Pedal Module
Special tools, testers and auxiliary items required
‹› Release Tool (T10238)
Removing
-
Remove the steering column cover fasteners - arrows - and cover.
-
Pry out the cap - item 4 -=> [ Cap ] See: Accelerator Pedal Module Overview using a screwdriver.
-
Remove the bolt - item 3 -=> [ Bolt ] See: Accelerator Pedal Module Overview.
-
Slide the release tool (T10238) as shown into the openings designated for it until it stops and remove the accelerator pedal module.
-
Disconnect harness connector from accelerator pedal module. Do this by pressing the connector securing element down.
Installing