Do Not Sell My Personal Information
volkswagen Workshop Repair Guides

Volkswagen Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

-

Connect the connector - 2 - to the accelerator pedal module.

The connector must engage audibly.

-

Press the accelerator pedal module onto the retaining pins -  6 -.

-

Insert the centering pin - 7 - into the hole on vehicle floor.

-

Secure the accelerator pedal module with the bolt - 3 -, tightening specification: 10 Nm, and install the cover cap - 4 -. 

-

Reinstall the steering column cover and fasteners.

Powertrain Management > Computers and Control Systems > Electronic Throttle Actuator > Component Information > Service and Repair > Accelerator Pedal Module Overview > Page 2797

< PREV PAGE NEXT PAGE >