Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Powertrain Management > Computers and Control Systems > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster Valves > Page 3083
Variable Valve Timing Actuator: Service and Repair
Camshaft Adjuster with Camshaft Timing Chain, Installing
‹› A revised camshaft adjuster is being installed as of 12.08. To recognize the new adjuster: starting in 12.08 the exhaust camshaft adjuster 32A has a
=> [ Vehicles through 11.08 ]
=> [ Vehicles from 12.08 ]
Vehicles through 11.08
Rotate the crankshaft at the vibration damper bolt in engine rotation direction to the Top Dead Center (TDC) cylinder 1 mark - arrow -.
The camshaft lobes - A - for cylinder 1 must face each other.
Install the (T10068 A) into both camshaft grooves. If necessary, slightly rotate the camshaft back and forth using an open end wrench.
|[PREV PAGE] [NEXT PAGE]|