Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Restraint Systems > Air Bag Systems > Impact Sensor > Component Information > Locations > Page 6391

Page 1
background image

Impact Sensor: Service and Repair

Front Door Crash Sensors

‹› Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the

same manner.

Removing

CAUTION!
Observe safety precautions for working on airbags.

-

Disconnect vehicle battery.

-

Remove corresponding door trim:

‹› Driver's side, refer to => [ Driver Door Trim ] See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and

Repair/Driver Door Trim

‹› Passenger's side, refer to => [ Passenger Door Trim ] See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service

and Repair/Passenger Door Trim

-

Separate wiring harness - 1 - from crash sensor -  3 -.

-

Remove the two bolts - 2 - (2.5 Nm).

Installing

-

Perform the steps used for removal in reverse order.

-

Switch on ignition.

CAUTION!
Make sure that no one is in the vehicle.

-

Connect vehicle battery.

Restraint Systems > Air Bag Systems > Impact Sensor > Component Information > Locations > Page 6391

[PREV PAGE] [NEXT PAGE]