Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Restraint Systems > Air Bag Systems > Seat Occupant Sensor > Component Information > Service Precautions > Passive Occupant Detection System > Page 6425
Seat Occupant Sensor: Service Precautions
Passive Occupant Detection System Safety Precautions
This equipment is only installed on vehicles released in the USA.
After every repair on the passenger seat in which the seat and/or backrest cover was "disengaged" basic setting on Seat Occupied
The seat occupied recognition mat must not be kinked.
A leaking mat must be replaced (repair kit).
The seat occupied recognition pressure hose must not be kinked.
Seat occupied recognition (repair kit) components must not fall on hard surfaces.
Seat occupied recognition components must not come in contact with grease.
There is the danger that the seat occupied recognition components may be damaged by sharp objects when working on the seat. It is
The mat, the crease and various covers must be fitted to be free of folds.
When installing, ensure upholstery and cover are installed correctly.
Replace all upholstery clips and clip connectors from cover, ensure it is positioned correctly on seat when doing so.
System basic setting is only possible at temperatures between 32° F and 104° F (0° C and +40° C).
Make sure that no objects are placed on seat when performing basic setting.
Use of seat covers, such as cushions or something similar, impairs seat occupied recognition function and airbag system effectiveness.
|[PREV PAGE] [NEXT PAGE]|