Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Restraint Systems > Relays and Modules - Restraint Systems > Seat Occupant Classification Module - Air Bag > Component Information > Technical Service Bulletins > Customer Interest: > 6911-01 > Feb > 11 > Restraints - Air Bag Lamp ON/DTC 02511 014 Stored > Page 6465

Page 3
background image

See Repair Manual, Repair Groups 69 and 72, for detailed information.

The following software program will address the topic concern, using the procedure below.

^

Connect the Midtronics IN-Charge-940 to battery to ensure a constant voltage between 12.5 and 14.5 volts during flash procedure.

^

Connect VAS 5052 or VAS 6150 tester to OBD connector.

^

Verify airbag indicator light is illuminated and that code 02511 014-Seat Occupant Recognition Control Module Faulty is stored in Air Bag -15-.

^

Switch the ignition OFF.

^

Remove OBD Cable from vehicle and scan tool.

^

Connect VAS 6103 cable to serial port RS-232 as shown.

^

Connect cable VAS 6103/2 to Cable VAS 6103.

^

Connect remaining OBD connector on VAS 6103/2 to the vehicles OBD diagnostic port.

Restraint Systems > Relays and Modules - Restraint Systems > Seat Occupant Classification Module - Air Bag > Component Information > Technical Service Bulletins > Customer Interest: > 6911-01 > Feb > 11 > Restraints - Air Bag Lamp ON/DTC 02511 014 Stored > Page 6465

[PREV PAGE] [NEXT PAGE]