Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Service and Repair > Procedures > Page 624

Page 3
background image

‹› The parking aid sensor from 06/2007 is installed in the Eos with an adapter so that it fits into the bracket.

-

Switch off ignition, switch off all electrical consumers and remove ignition key.

-

Remove rear bumper cover.

-

Disengage retaining tabs - arrows - with ( T10345) and remove sensor with connector connected from bumper cover. 

-

Press button - 2 - to disconnect harness connector -  3 - from sensor - 1 -.

-

Remove the adapter - A - from the sensor in the direction of arrow.

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Service and Repair > Procedures > Page 624

[PREV PAGE] [NEXT PAGE]