Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Sensors and Switches > Sensors and Switches - Body and Frame > Convertible Top Position Sensor / Switch > Component Information > Service and Repair > Roof Pillar Front Position Sensors > Page 694
Remove luggage compartment side trim.
Remove the rivet - 2 - and the sensor - 1/4 - from the body panel - 3/5 -.
When replacing sensor, disconnect wire - 3 - approximately 160 mm from sensor. After repairing wiring harness, wiring must be secured in harness
Secure the rivets - 2 -.
|[PREV PAGE] [NEXT PAGE]|