Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Occupant Sensor > Component Information > Service and Repair > Procedures > Page 1165

Page 3
background image

-

Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seats

-

Remove cover from upholstery of front seat cushion (front seat cushion is not removed). Refer to => [ Front Seat Pan Covers and Upholstery ] 
See: Body and Frame/Seats/Service and Repair/Overhaul/Seats - Upholstery, Covers/Front Seat Covers and Upholstery

-

Unclip pressure hose - 6 - from retainers.

-

Unclip Seat Occupied Recognition Pressure Sensor (G452) - 5 - from retainer, when doing this do not disconnect harness connectors - 3 - or - 4 -
at Seat Occupied Recognition Pressure Sensor (G452) and similarly at Seat Occupied Recognition Control Module ( J706) - 2 -.

-

Remove bolts - 1 - (1.5 Nm).

Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Occupant Sensor > Component Information > Service and Repair > Procedures > Page 1165

[PREV PAGE] [NEXT PAGE]