Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Steering and Suspension > Suspension > Strut / Shock Tower > Front Strut / Shock Tower > System Information > Service and Repair > Removal and Replacement > Page 5615

Page 6
background image

-

Install plenum chamber cover.

-

Install wiper arms Windshield washing system; wiper arms, removing and installing

-

Secure (V.A.G 1383 A) with wheel hub support - T10149 - to wheel hub using a wheel bolt. 

CAUTION!
‹› Do not lift or lower vehicle when the (V.A.G 1383 A) stands below the vehicle. Vehicle could slip off lift.

‹› Do not leave (V.A.G 1383 A) below vehicle any longer than necessary.

-

Position suspension strut on wheel bearing housing.

-

Remove wire on wheel bearing housing.

-

Carefully lift the wheel bearing housing with the (V.A.G 1383 A) enough so that the suspension strut/wheel bearing housing bolt can be inserted.

-

To do so, press the brake disc by hand in direction of suspension strut while lifting.

Otherwise strut tube may be canted in hole of wheel bearing housing. 

-

Remove (3424).

-

Tighten threaded connection of wheel bearing housing/suspension strut - arrow -. 

Steering and Suspension > Suspension > Strut / Shock Tower > Front Strut / Shock Tower > System Information > Service and Repair > Removal and Replacement > Page 5615

[PREV PAGE] [NEXT PAGE]