Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Steering and Suspension > Suspension > Strut / Shock Tower > Front Strut / Shock Tower > System Information > Service and Repair > Removal and Replacement > Page 5628

Page 2
background image

6. Ring spanner insert AF 21 (T10001/5)

7. Ratchet (T10001/11)

CAUTION!
First pre-load spring far enough so that tension is relieved on upper spring plate!

-

Make sure the coil spring fits correctly inside the (V.A.G 1752/4) - arrows -.

-

Remove hex nut from piston rod.

-

Remove individual components of suspension strut and coil spring with (V.A.G 1752/1).

Coil Spring, Installing

-

Install the coil spring on the lower spring plate using the (V.A.G 1752/1).

End of spring coil must rest against stop - arrow -. 

-

Tighten new hex nut to piston rod.

-

Relieve tension on (V.A.G 1752/1) and remove from coil spring.

-

Install suspension strut. Refer to => [ Installing ] See: Removal and Replacement/Front Suspension/Suspension Strut. 

Tightening Specifications

Steering and Suspension > Suspension > Strut / Shock Tower > Front Strut / Shock Tower > System Information > Service and Repair > Removal and Replacement > Page 5628

[PREV PAGE] [NEXT PAGE]