Eos (1F7) V6-3.2L (BUB) (2008)
Tires: Service and Repair
Tires, With Run-Flat Tires
Tires, with Run-Flat Tires
=> [ Tire, Pressing Off ]
=> [ Tires, Dismounting ]
=> [ Tires, Mounting ]
Tire, Pressing Off
‹› Note the safety precautions. Refer to => [ Safety Precautions for Run-Flat Tires, Removing and Mounting ] See: Service
Precautions/Safety Precautions For Run-Flat Tires, Removing and Mounting.
Release air from tires, unscrew the nickel-coated valve insert to do so.
When pressing off tire on a tire dismounting/mounting machine with press-off blade, always make sure that tire valve/tire pressure sensor - arrow
- is located opposite the press-off blade - 1 -.
‹› Press-off blade must be applied at maximum 2 cm removed from rim flange.
Remove balancing weights and coarse dirt from disc wheel.
Press off both tire beads around circumference while thoroughly applying tire mounting paste between tire and rim flange - arrow -.