Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Transmission and Drivetrain > Automatic Transmission/Transaxle > Fluid Filter - A/T > Component Information > Service and Repair > Oil Filter, Changing and Adjusting Oil Level > Page 3500
A black plastic overflow tube is located in this hole (removed with a 8 mm socket, tightening specification: 3 Nm). Its length determines the oil level
Remove this oil tube.
About 5 liters of oil will drain.
Reinstall overflow tube, tighten to 3 Nm.
Install adapter - A - from adapter for oil filling (VAS 6262) hand tight in inspection hole.
Shake oil containers before opening.
|[PREV PAGE] [NEXT PAGE]|