Eurovan V6-2.8L (AXK) (2001)
-
Using wedge 3409, insert inner sealing lip into cylinder groove.
NOTE: Hold piston in front of caliper housing while inserting sealing lip.
-
Screw piston into housing by turning knurled wheel clockwise.
NOTE:
^
Do not damage the protective seal when installing the piston.
^
Position special tool 3272 so that the collar (arrow) of the to9l is seated on the brake caliper
^
If the piston is difficult to move, use a 13 mm open end wrench on the flats (arrow A) provided for this purpose.
^
If the piston is pushed back with a piston resetting tool or by operating the foot brake the automatic adjustment in the brake caliper is
destroyed.
-
Install brake pads.
Replacement