Eurovan V6-2.8L (AXK) (2001)
^
Install union nut-3-.
^
Turn knurled ring until it completely contacts the housing (height adjustment).
^
Completely screw on mouth piece -2-. While doing so, make sure lock nut -1 does not make contact.
^
Tighten lock nut -1-.
^
Screw on internally threaded pop rivet, lever arms of pliers must be spread apart as far as possible during this process.
^
Pull in internally threaded pop rivet.
Note: Make sure the collar contacts the internally threaded pop rivet completely while pulling in.
Pull in internally threaded pop rivet M6 with bolt, nut and disc
^
Screw in bolt M6 X 50 with nut M6 and two washers far enough into the internally threaded pop rivet until the nut is filled up.
1 - Internally threaded pop rivet M6, OEM Part No. N 102 952 01
2 - Washers
3 - Nut M6
4 - Bolt M6 x 50
^
Turn nut M6 against collar of internally threaded pop rivet by hand.
^
Inserting internally threaded pop rivet M6 into crossmember.
1 - already pulled in internally threaded pop rivet