Eurovan V6-2792cc 2.8L (AES) (1998)
Trunk / Liftgate Shock / Support: Removal and Replacement
Rear Lid Gas Strut, Removing
(Diagram shows left gas strut)
-
Open and support rear lid.
-
Lift locking clip - 1 - with screwdriver and pull gas strut off ball-head pins - 2 - and - 4 -.
NOTE: When reusing gas strut, locking clip - 1 - must not be completely removed from ball socket, otherwise clip will be damaged.
Tightening torque:
Ball-head pin - 2 - 20 Nm
Screw - 3 - = 8 Nm
-
Bracket with ball-head pin - 4 -.