Eurovan V6-2792cc 2.8L (AES) (1998)
/Page-578002.png)
-
Fuse 29 -arrow- OK
-
Disconnect 3-pin connector -1- from LDP.
-
Connect VAG 1527 B Voltage tester between connector terminal 3 (positive) and engine Ground.
-
Start engine and let idle.
-
LED must light up.
If LED does not light up:
-
Check wiring between connector terminal 3 and central electric for open circuit using Wiring diagram, repair as necessary.
-
Switch ignition OFF.
Wiring, checking
