Do Not Sell My Personal Information
volkswagen Workshop Repair Guides

Volkswagen Workshop Manuals

< PREV PAGE NEXT PAGE >
Body repair work.
Sliding roof / exploded view - Golf, Jetta
Adjustment operations on the sliding roof - Golf, Jetta
 
U60-0002
  • ‒ → To avoid wind noise adjust height at front and rear as shown in
    drawing.
 
V60-0220

Height adjustment, front

  • ‒ → Unclip roof panel trim and push to the rear.
  • ‒ Slacken mounting screws -1-.
  • ‒ Turn height adjustment screw -2- according to required adjustment.
  • ‒ Securely tighten mounting screw -1-.
 
V60-0221

Height adjustment, rear

  • ‒ → Disengage leaf springs.
  • ‒ Slacken slotted screw -1- and adjust distance between roof panel and roof by moving in the serration.
  • ‒ Securely tighten slotted screw -1- and secure roof panel trim.

Adjusting parallel movement of sliding roof panel

  • ‒ Unclip roof panel trim and push to the rear.
  • ‒ Lower roof by turning crank one half revolution.
  • ‒ Unscrew crank and cable drive (see => Fig.6).
  • ‒ Remove cable drive with pinion from cables.
  • ‒ Push roof panel backwards and forwards several times by hand and then push it forwards until it rests evenly in position.
  • ‒ Fit cable drive in cables and turn slightly.
  • ‒ Check parallel movement.

Body > Body repair work. > Sliding roof > Sliding roof / exploded view - Golf, Jetta > Adjustment operations on the sliding roof - Golf, Jetta

< PREV PAGE NEXT PAGE >