Golf Mk1
|
Controls, Housing
Selector shaft cover modified
|
 |
|
|
→ From gearbox date 22 01 0 the selector shaft cover -A- has been provided with a rib -arrow 1- . For this reason, the gearbox housing has been provided with a contact surface -arrow 2- in the rib area. Note: The modified cover can only be screwed into gearbox housings with a contact surface. The cover is not offered as a service part beacuse the old cover can be screwed into all gearbox housings. On some gearboxes there is an O-ring fitted in addition under the new cover. On these gearboxes an O-ring must once again be installed when repairs are carried out. Part No. N 903.543.01 |
