Golf Mk1
Dismantling and assembling gearbox
Gearbox breather relocation
As a running change the old gearbox breather above the gearshift shaft cover, has been relocated in the area between the gearshift shaft pin screw and the clutch cable guide. If the gearbox housing is enchanged, a sleeve -Part No. 014 301 473- must be driven into the breather drilling using the special tool 32 - 106. The sleeve is then to be fitted with a plastic cap - Part No. 014 301 485-. |
→
Old gearbox breather |
New gearbox breather |