Golf Mk1
|
Controls, Housing
Selector shaft cover modified
|
 |
|
|
→ From gearbox date 03 07 9 the selector shaft cover -A- has been provided with a rib -arrow1-. For this reason, the gearbox housing has been provided with a contact surface -arrow2- in the rib area. Notes: The modified cover can only be screwed into gearbox housing with a contact surface. The cover is not offered as a service part because the old cover can be screwed into all gearbox housing. On some gearboxes there is an O-ring fitted in addition under the new cover. On these gearboxes an O-ring must once again be installed when repairs are carried out. Part No. 903.543.01 |
