- Running gear
- Body
- Engine, mechanics
- Power transmission
- Power unit
- Motronic MP 9.0 injection and ignition system
- Self diagnosis, V.A.G Inspection Service
- Mixture preparation system, electronic inj.,Gas
- Motronic injection and ignition system
- Fitting locations overview
- Servicing injection part
- Dismantling and assembling intake manifold
- Dismantling and assembling air cleaner
- Safety precautions
- Rules for cleanliness
- Technical data
- Idling check
- Checking and adjusting CO content
- Performing basic setting
- Checking engine operating modes
- Checking throttle valve control part
- Checking voltage supply
- Check idling switch
- Checking throttle valve positioner and throttle valve positioner potentiometer
- Checking throttle valve potentiometer
- Checking coolant temperature sender
- Checking intake air temperature sender
- Checking speed signal
- Checking control unit voltage supply
- Matching engine electronic control unit to electronic immobilizer
- Checking signal from air conditioner compressor
- Checking injectors
- Checking fuel pressure regulator and holding pressure
- Checking intake air system for leaks (outside air) -Checking with engine leak detector spray G 001 800 A1
- Ignition system, glow plug system
- K-Jetronic/Ignition system
- 34 PICT, Keihin carburettor and ignition system
- 4 Cyl injection engine (2 valve), Mechanics
- 4 cyl. carburetor engine, mechanics (1.5, 1.6 and 1.8 litre engine)
- Heating, ventilation, air conditioning system