Volkswagen Workshop Service and Repair Manuals > Golf Mk3 > Automatic gearbox | Automatic gearbox 096 | Automatic gearbox, control, assembly, housing | Checking and topping up ATF level

Automatic gearbox 096

Checking and topping up ATF level

Topping up ATF

Attention!

◆ Too much ATF will cause gearbox malfunctions and must therefore be extracted. This can be done with probe V.A.G 1358 A/1 and V.A.G 1358A.
◆ Only ATF with the designation Dexron may be used. Do not use any lubricant additives.

‒ Pour in ATF through a funnel. Approx. 3 litres at first for an initial filling.
‒ Then start engine and shift through all the selector lever positions with the vehicle stationary.
‒ Check ATF level =>Page 37-53.
‒ Use a non-fluffing cloth for wiping off the dipstick.

The ATF level changes with the temperature of the fluid. The Min. and Max. markings on the dipstick relate to an ATF temperature of 60° C.

Volkswagen Workshop Service and Repair Manuals