volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Ending output > < Reading fault memory
Erasing fault memory
Erasing fault memory
Prerequisites:
l  Faults are rectified
l  Fault memory has been read again
   
Indicated on display:
–  Press keys -0- and -5- (the function “Erase fault memory” is entered with 05).
 
Rapid data transfer                 HELP
Select function XX                    
Indicated on display:
–  Confirm entry with the Q key.
 
Rapid data transfer                   Q
05 Erase fault memory               
Indicated on display:
–  Press key.
 
Rapid data transfer                   ->
Fault memory is erased!            
Indicated on display:
  Note
 
Rapid data transfer                 HELP
Select function XX                    
t  If this appears in the display, the test sequence is faulty.
t  Adhere strictly to the test procedure: first read the fault memory, then erase.
 
Rapid data transfer                 HELP
Select function XX                    
Warning!                                
Fault memory has not been read    

Ending output > < Reading fault memory