Golf Mk3
| Removing and installing bonnet lock cable |
| 1 - | Release lever |
| q | Cable attached. |
| 2 - | Self-tapping screw |
| 3 - | Sealing grommet |
| 4 - | Clip |
| 5 - | Cable |
| 6 - | Lock |
| q | Cable attached. |
| 7 - | Hexagon head bolt (self-locking) |
| q | 12 Nm |
| q | If reusing: clean thread of bolt using wire brush and use tap on nut thread; coat bolt with locking compound-D 185 400 A2-. |
| 8 - | Spreader clip |
