Golf Mk3
| Removing and installing rear lid lock (estate) 08.95 ► |
| 1 - | Retaining clip |
| 2 - | Handle |
| q | Removing: |
| – | Remove boot lid trim → Chapter |
| – | Unclip pull rod → Item, lever out retaining clip → Item and take lock cylinder housing out of handle → Item. |
| – | Separate connector for luggage compartment light and, if necessary, unclip actuator rod for central locking. |
| – | Unscrew screws → Item and take handle out of rear lid. |
| 3 - | Lock plate |
| 4 - | Countersunk bolt |
| q | 20 Nm |
| 5 - | Countersunk bolt |
| q | 20 Nm |
| 6 - | Lock |
| q | Installing - only with rotary latch engaged |
| 7 - | Bolt |
| q | 4 Nm |
| 8 - | Pull rod |
| 9 - | Lock cylinder housing |
| q | Removing: |
| – | Remove boot lid trim → Chapter |
| – | Unclip pull rod → Item, lever out retaining clip → Item and take lock cylinder housing out of handle → Item. |
