| Cleaning off excess adhesive sealing material |
| –
| Use of adhesive remover -D 002 000 10- as a cleaning solution is recommended. Observe the appropriate safety precautions when performing this work. |
WARNING | Glass which has just been installed should not be pressed outwards whilst cleaning from inside of vehicle. |
|
| –
| First clean painted surface as much as possible using a dry cloth. Remove residue using adhesive remover -D 002 000 10-. |
| –
| Cleaning plastic trim: Allow adhesive sealing material to cure (approx. one hour) and then peel off. |
|
|
|
